AT541NC | 1-CHANNEL, 500W N CORE CLASS D AMPLIFIER Amplifier Technologies undertook an approach to Class D amplification with the goal of Class AB sonic performance characteristics combined with the efficiency of power and space offered by a Class D design. The results are the AT500NC Series amps. Offered at two power levels of 200 watts per channel from 2 to 8 channels and at 500 watts per channel from 1 to 4 channels, AT500NC amps deliver the classic ATI sound, power and reliability in massively compact 3RU chassis designs. The AT500NC Series amps incorporate Hypex N-Core® Class D output power modules combined with ATI input stages and linear power supplies. ✅ Hypex N-Core® Class D amplifier topology ✅ Linear power supplies ✅ Automatic AC power recognition ✅ Microprocessor controlled soft-start turn-on - 500W per channel
- Differential bridged output modules
- 1 to 4 channel models
- 3RU 5.25” rack mount, 6” standard height
Analog Audio Inputs | One Single-ended (RCA) jack per channel & One Balanced (XLR) jack per channel Slide Switch to choose jack | Input Impedance | 20 kΩ Nominal | Input Sensitivity | AT52Xnc - 1.5V input for 200W RMS AT54Xnc - 2.35V RMS input for 500W 8 ohms 8 ohms | Gain | 28.5dB | Polarity | (Single-Ended) Non-Inverting Balanced; Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output | Speaker Output | Binding posts; 1 pair per channel | Mode / Process | Standby: Amplifier is ready to be turned on via front panel switch or remote trigger. Overcurrent, D.C., and/or thermal protection: Amplifier will cycle. Catastrophic D.C. or output stage failure: Amplifier will shut down. | Frequency Response | +0, -.5 dB, 5 Hz to 20 kHz, load independent | Crosstalk | > 90dB | Dimensions | AT522, AT523. AT524, AT542 17” x 5 11/16” x 10 5/8” (432 mm x 145 mm x 270 mm) AT525 - AT528, AT543, AT544 17” x 5 7/8” x 15 1/2” (432 mm x 150 mm x 394 mm) Add 1 inch (25mm) depth for connectors. | Weight | Model dependent: 39 lbs. to 65 ½ lbs.; 17.8 to 29.8 kg | Additional Notes: - All measurements taken within the 117VAC line voltage range. For 230VAC line voltage range, current draw will be ~0.5X the currents listed in the table. Measurements taken while driving amplifier channels with 1kHz sine wave.
- Nominal reading, ±5W.
- We do not recommend running the amplifiers for extended periods of time over the fuse rating. This was done for testing purposes only.
- All channels driven at 300W per channel
- 4 channels at 300W per channel.
- All channels at 500W per channel.
| Loading… |
WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|