AT52XNC Amplifiers
The AT5XXNC amplifiers use Hypex N-Core Class D output modules with ATI designed input buffers and linear power supplies and are available with two power configurations. The AT52XNC amps are rated at 200W RMS per channel at 8 ohms with 300W RMS at 4 ohms and are available with 2 to 8 channels. The AT54XNC amplifiers use two N-Core modules per channel in a differential bridged output configuration delivering 500W RMS per channel at 8 ohms and 900W RMS at 4 ohms. The AT54XNC amplifiers are available with 2, 3 or 4 channels.
These AT5XXNC series amplifiers break new ground in other ways. They are the first ATI amplifiers to use micro-processor control for turn-on delay and feature automatic AC power recognition and configuration. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure. The amplifiers also incorporate a new and novel “sleep” circuit. When the amplifier receives no input signal for a period of 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected on any channel, normal playback operation resumes instantaneously.
FEATURES
Remote Trigger: Activated from 3.3VDC to 24 VDC via a heavy-duty relay
Protection Circuits: Optically - coupled with full automatic reset.
Toroid Transformers: 40% more efficient than EI type. Each transformer has two bi-filar windings to assure low noise and crosstalk.
Circuit Boards: Double-sided, FR-4 glass-epoxy, computer-grade boards are assembled in-house.
Soft Start Circuitry:
New micro-processor controlled turn-on board first ascertains input voltage and configures transformers for 120V or 230V operation then ultra soft turn-on timers reduce in-rush current to a minimum. Multiple units can be turned on withouttripping circuit breakers eliminating the need for sequencing.
Amplifier Output: Hypex N-Core NC-500 Class D amplifier modules with ATI's custom input buffer insures edge-of-the-art operation.
Power Cord: 20A IEC power inlet with detachable, 3-wire cord.
Dimensions:
Two to four channel models: 17"W X 5 3/4"H X 10 5/8"D
Five to eight channel models: 17"W X 5 3/4"H x 15 1/2"D
Weight: 39 to 62 1/2 lbs (model dependent)
SPECIFICATIONS
Number of Channels: 2-4
EIA 1kHz Output Power at 8Ω*: 250 watts
EIA 1kHz Output Power at 4Ω*: 375 watts
FTC Full Bandwidth Output Power at 8Ω**: 200 watts
FTC Full Bandwidth Output Power at 4Ω**: 300 watts
Input Sensitivity for Full Rated Output: 1.6 volts
Frequency Response: +0,-.5dB20-20kHz
Damping Factor: >5000
Crosstalk: Greater than 100 dB from 20 Hz—20 kHz
Voltage Gain through RCA Jacks: 27.8 dB
Voltage Gain through XLR Jacks: 27.8 dB
Slew Rate: >60V/µSec
Input Impedance: 47 kΩ
DC Output Offset: Less than ± 10mV
Power Requirements: 120/230VAC
Chassis Dimensions (W x H x D) Inches: 17x5 3/4x10 5/8
Chassis Dimensions (W x H x D) millimeters: 432x146x270
Net Weight (lbs/kg) Model Dependent: 39-64 1/2/17.8-29.8
Shipping Weight (lbs/kg) Model Dependent: 49-75 1/2 22.3-34.4